JUPW1101 Specifications

Hardware
10W Wireless Charger
Input	5V/2A, 9V/2A, 12V/1.5A
Output	5V/1A – 1.5A or 9V/1.1A
Quick Charge^™ 3.0 Charger
Input	100 – 240V, 50/60 Hz, 0.5A
Output	5V/3A, 9V/2A, 12V/1.5A
Indicator light identification
Connected to a power outlet	Flashes blue to green 3 times and then turns off
Charging	Flashes blue 3 times and then stays lit
Fully charged	Green light
When the mobile device is removed from the wireless charger	Flashes blue
Physical Specifications
Weight	10W Wireless Charger: Approximately 79.5g Quick Charge^™ 3.0 Charger: Approximately 58.5g
Environmental
Storage Temperature	-20 – 70°C
Storage Humidity	5 – 95% RH. Non-condensing
Operation Temperature	0 – 25°C
Operation Humidity	< 35 – 95% RH. Non-condensing

System Requirements

Compatible with all Qi^™ devices
For 10W and 7.5W fast charge, the Quick Charge^™ 3.0/2.0 charger (included) must be used
The fast charge only supports iPhone^® and select Android^™ devices.

Note:

Use only j5create approved chargers (5V/3A, 9V/2A, 2V/1.5A). Unauthorized chargers may cause damage or the wireless charger may malfunction.
To ensure the best charging performance, put the mobile device in the center of the 10W wireless charger. If the mobile device is not properly placed on the 10W wireless charger’s surface (depending on the location of the mobile device’s wireless charging coil), your mobile device may not charge properly.
Do not place foreign materials, such as metal objects, magnets or cards with a magnetic strip between the mobile device and the wireless charger. The mobile device may not charge properly or may become damaged due to overheating.
Wireless charging may not work properly if you have attached a thick case to your mobile device. If your case is thick, remove it before placing your mobile device on the wireless charger.

Package Contents